Lowrance X96 Fish Finder W/200KHZ Transducer
Lowrance X96 Fish Finder Specifications:
- High-definition 5" (12.7 cm) diagonal high-contrast Film SuperTwist LCD
- 320V x 320H resolution
- Superb viewing in direct sunlight
- Backlit screen and keypad for night/low-light viewing
- 16-level grayscale
- Depth penetration to 800 feet* (244 m)
- 1,500 W peak-to-peak power
- High-performance, low-profile, transom-mount, 200 kHz Skimmer® transducer with built-in water surface temp sensor
- FasTrack™ full-screen LCD flasher mode with GRAYLINE®
- FlashGraf™ feature combines a scrolling sonar graph with a digital flasher
- FishReveal™ feature exposes fish targets hidden in cover
- HyperScroll™ displays fish targets at higher boat speeds
- Advanced Signal Processing (ASP™), GRAYLINE®, Advanced Fish Symbol I.D.™, FishTrack™,
multi-zoom options,
sonar alarms, backup memory
- Back-up memory saves customized settings
- Other transducer options also available
- Sealed and waterproof
- Full one-year warranty
|
Owners Review
"The unit was easy to install and the ease of use is great. I would definitely recommend the unit to a
friend."
DPDallin
|
|
Owner's Review
"This product is very user friendly and can be put on and taken off in no time. The only trouble I had
with it was that sometimes the suction cup would come off my aluminum boat. This didn't happen very often and was very easy to reapply it
when it did. I have also used this product with my float tube to find spring holes in some of our local ponds and lakes. For the price
this is a steal."
4wheelernut
|
Lowrance X96 Fish Finder Comments
|
Question:
Does the Lowrance X96 Fish Finder have a programmable depth alarm like the LMS 350A ?
Walter
Answer:
The Lowrance X96 Fish Finder has 3 alarms, Fish, Zone and Depth. The Depth alarm has both a Shallow and
Deep setting. The alarm will sound a tone when the bottom signal goes shallower or deeper than the alarm's setting. Both alarms only work
off the digital bottom depth signals. No other targets will trip them. the can be used together or by themselves at the same time.
Adjusting Depth Alarms:
1) Press Alarm
2) Press --> to Shallow Alarm Depth| ENT.
3) Press up or down arrows to change the first number, then press --> to move the cursor to the next number
and repeat until the depth is correct then press ENT.
4) Press <-- to Shallow Alarm Enabled|ENT|EXIT.
5) To turn off the alarm, Press ALARM| ENT| ENT| EXIT
6) Repeat the process for the Deep alarm.
|
